waterproof outdoor solar lights

How to Waterproof Outdoor Solar Lights

Solar lights make a wonderful way to add light to your yard without relying on expensive power. However, they can be prone to getting wet or damaged in the rain.

Choosing waterproof outdoor solar lights will help you enjoy your backyard lighting no matter the weather. Look for the IP rating in product specifications to ensure your lights are water-resistant.

1. Empty Plastic Soda Bottles

The premise for this one might seem like a no-brainer, but it’s amazing how many people don’t think to try it. Inspired by solar outdoor waterproof solar lights lights used in third world countries, this DIY project requires only a 2-liter bottle, foil and bleach. The result is a solar light that produces enough light to illuminate a shed during the day without any batteries or bulbs. It’s a great way to learn about recycling and can be a fun activity for the whole family.

The first step is to clean the bottle thoroughly. Then, tear off a piece of aluminum foil and wrap it around the top portion of the bottle. This will help reflect the sunlight and make your lamp brighter. Once the bottle is complete, screw in the lid and add a few drops of bleach to keep it clean and free from algae.

You can create a variety of designs on your bottle lamp with masking tape, such as polka dots or chevrons. Once the design is cut, use an X-acto knife to trim any rough edges. Then, spray paint the bottles with your desired color in a well-ventilated area.

This simple, affordable and eco-friendly light was made by a Filipino entrepreneur named Illac Diaz after Typhoon Haiyan. He now runs a project called Liter of Light, where volunteers learn how to fashion these lights themselves, and then install them in communities hit hard by natural disasters.

2. Spray Paint

Solar lights are a great way to add ambiance to your outdoor space, especially during the holidays or while having a BBQ. They can brighten up your patio while you entertain, or shine around your pool for nighttime swimming. However, they can stop working if they get wet from rain, snow or dew. If you want to use them all year round, then you need to waterproof them. Luckily, there is a simple solution for that: spray paint!

Using the appropriate type of spray paint and following the instructions on the can, you can make your solar lights waterproof. Just be sure to tape off any areas that you don’t wish to paint, then apply two or more light coats of spray paint. Once the coats have dried, you can glue them to the chandelier and enjoy your waterproof solar lights all year round!

If you are worried about your solar lights being damaged by the elements, then you should consider bringing them inside during heavy rainfall storms. You can also purchase solar lights with higher water resistance ratings that are able to stand up to heavier rains, but you should always check the weather forecast before leaving them outside.

You can find a wide variety of solar lights at Goodwill or other thrift stores, which are perfect for this DIY project! You can even find funky or clunky candleholders to upcycle into solar lights, so be sure to check the Housewares and Lighting sections when shopping.

3. Rubber Seals

There are many products on the market that promise to waterproof solar lights but not all of them are created equal. If you live in a place that has a lot of rain or is frequently hit by typhoons or hurricanes then it may be best to buy a product with a high waterproof rating. However, if you only experience occasional rain storms then it is okay to go for a lower waterproof level.

The waterproofing of a solar light is determined by the IP protection level mark on it. This is a system of classification that was drafted by the International Electrotechnical Commission. The first number indicates the level of dust resistance that the appliance has, while the second number denotes the tightness against liquid and moisture. For example, the IP65 Solar LED street Outdoor Waterproof Solar Light Manufacturer lights are completely dust particulate protected and also fully sealed against water projected from a spray nozzle.

A solar-powered outdoor light pack can be used to illuminate walkways, driveways, or flower beds and add a little ambiance. There are different models available, such as those with a lantern-like design or those with a string of dainty bulbs that look like fairy lights. These can be mounted on a wall or put on a table or porch and are ideal for creating a warm, inviting atmosphere.

4. Waterproofing

If you are concerned about water getting into your solar lights there are a few things that you can do. The first thing is to make sure that your solar light has the proper waterproof rating for where it will be installed. Look for the IP (Ingress Protection) rating on the product. This is a two-digit number that indicates how well the solar light can resist dust and water. If you have solar lights by your swimming pool, for instance, then you want to be sure that they are rated to withstand immersion in water up to six inches deep.

Another way to help your lights stay waterproof is to clean them regularly. This helps to keep the panels clear for maximum charging and also makes it easier to see any damage or degradation. You should also try to bring them inside when it is very stormy or if the weather is forecast to be severe for several days in a row.

Finally, if you live in an area that is subject to heavy snowfall or extreme cold temperatures then it may be best to bring your solar lights inside through the winter. This is especially true if you have them set up in an area that can be flash-flooded by rain or snow. This is because the panels and batteries will be exposed to a lot of water which can quickly cause them to fail or stop working altogether.